Table of Contents
Advertisement
Available languages
Available languages
If the time is incorrect, this could be due to a weak or disrupted TV signal. If this is the case,
switch off the automatic function.
1
Press SYSTEM-MENU on the remote control. The menu bar
will appear.
2
' using D or C .
Select '
3
Select '
4
Select '
5
Select '
6
Confirm with OK .
7
Change the time in line '
your remote control.
8
Check '
To select between the fields, use B or A .
Change the information with D , C or the number buttons
0..9 .
9
D or
Use
A select one of the following settings in '
then press OK .
'
': The time adjusts automatically for '
in April and October.
'
': The time does not adjust for '
10
When all settings are correct, confirm with OK .
11
To end, press SYSTEM-MENU repeatedly.
If the setting has been confirmed with OK , the automatic system is disabled.
' using B or A and confirm with C .
' using B or A and confirm with C .
' with B or A .
' using the number buttons 0..9 on
', '
', '
', and '
C to select '
' in the same way.
B or
', with
',
' Time
' Time.
Installing your DVD recorder
Advertisement
Table of Contents
