The Mx-Edit Library; Editing A Program - Lexicon MX300 User Manual

The MX-Edit Editor/Librarian - Windows
TM
The mX-edIT
The MX-Edit Library contains the Factory and User programs that are currently loaded
in your MX300. When you first open MX-Edit, it communicates via USB (or MIDI) with
the MX300 hardware, and populates the Library with all the information about each of
the Factory and User programs stored in MX300's physical memory.
To view programs in the Library window, click the MX300 tab in the upper left corner,
then double-click the Factory or User icon to expand the Library and see the Factory or
User program lists. The Factory list is always the same, as Factory programs cannot be
overwritten; the User program list represents the User programs currently saved in your
MX300 hardware.
The Library can support multiple MX300 devices at the same time. Each device that is
connected to the Library is represented by a name and an icon next to the tool bar (just
below the menus). To view, load, and edit programs for a device, click its icon.

edITIng a Program

To open a program, choose one of the following:
• To open a Factory or User program from the MX-Edit Library, double click on
that program number in the Library window.
• To open a program that has been saved to your computer (but doesn't appear
in the MX-Edit Library), click File and select Open Program. By default, the
Open dialog looks in the My Documents folder (or the last folder that
a program was opened from). Double-click the program to load it.
• To open a program with the currently active settings from the MX300, select
Open Current Program in the Device menu. This will retrieve all current
settings from the MX300, and display those settings in the Program Editor panel.
lIbrary
Tm
36
and Mac
® ®