Specifications - Behringer EURORACK UB1202 User Manual

10
EURORACK UB1202/UB1002/UB802/UB502 User Manual
Balanced ¼" TRS connector
strain relief clamp
sleeve
ring
tip
sleeve
ground/shield
ring
cold (-ve)
tip
hot (+ve)
For connection of balanced and unbalanced plugs,
ring and sleeve have to be bridged at the stereo plug.
Fig. 3.3: 1/4" stereo plug
¼" TRS headphones connector
strain relief clamp
sleeve
ring
tip
sleeve
ground/shield
ring
right signal
tip
left signal
Fig. 3.4: Stereo plug for headphones connection

4. Specifications

Mono Inputs
Microphone Inputs (IMP "Invisible" Mic Preamp)
Type
Mic E.I.N. 1 (20 Hz - 20 kHz)
@ 0 Ω source resistance
@ 50 Ω source resistance
@ 150 Ω source resistance
Frequency Response
<10 Hz - 150 kHz
<10 Hz - 200 kHz
Gain range
Max. input level
Impedance
Signal-to-noise ratio
Distortion (THD + N)
Line Input
Type
Impedance
Gain range
Max. input level
Fade-Out Attenuation (Crosstalk Attenuation)
2
Main fader closed
Channel muted
Channel fader muted
Frequency Response (Mic In Main Out)
<10 Hz - 90 kHz
<10 Hz - 160 kHz
Stereo Inputs
Type
Impedance
Max. input level
XLR connector, electronically balanced,
discrete input circuit
-134 dB / 135.7 dB A-weighted
-131 dB / 133.3 dB A-weighted
-129 dB / 130.5 dB A-weighted
-1 dB
-3 dB
+10 dB to +60 dB
+12 dBu @ +10 dB GAIN
approx. 2.6 kΩ balanced
110 dB / 112 dB A-weighted
(0 dBu In @ +22 dB GAIN)
0.005% / 0.004% A-weighted
1/4" TRS jack, electronically balanced
approx. 20 kΩ balanced,
approx. 10 kΩ unbalanced
-10 dB to +40 dB
+22 dBu @ 0 dB GAIN
90 dB
89.5 dB
89 dB
+0 dB / -1 dB
+0 dB / -3 dB
1/4" TRS jack, electronically balanced
approx. 20 kΩ
+22 dBu