Specifications - Behringer XENYX X1204USB Quick Start Manual

34
XENYX X1204USB/1204USB

Specifications

X1204USB
Mono Inputs
Microphone Inputs (XENYX Mic Preamp)
XLR connector, electronically balanced,
Type
Mic E.I.N.1 (20 Hz - 20 kHz)
@ 0 Ω source resistance
@ 50 Ω source resistance
@ 150 Ω source resistance
Frequency response
(-1 dB)
Frequency response
(-3 dB)
Gain range
Max. input level
Impedance
Signal-to-noise ratio 110 dB A-weighted (0 dBu In @ +22 dB GAIN)
Distortion (THD + N)
Line Input
Type ¼" TRS jack, electronically balanced
Impedance 20 k Ohms balanced, 10 k Ohms unbalanced
Gain range
Max. input level
Frequency Response (Mic In - Main Out)
<10 Hz - 90 kHz
<10 Hz - 160 kHz
Stereo Inputs
Type
Impedance 20 k Ohms balanced, 10 k Ohms unbalanced
Gain range
Max. input level
CD/Tape In
Type
Impedance
Max. input level
Equalizer
LOW
MID
HIGH
AUX Sends
Type
Impedance
Max. output level
1204USB
discrete input circuit
-134 dB 135.7 dB A-weighted
-131 dB 133.3 dB A-weighted
-129 dB 130.5 dB A-weighted
<10 Hz - 150 kHz (-1 dB)
<10 Hz - 200 kHz (-3 dB)
+10 dB to +60 dB
+12 dBu @ +10 dB GAIN
2.6 k Ohms balanced
0.005% / 0.004% A-weighted
-10 dB to +40 dB
30 dBu
+0 dB / -1 dB
+0 dB / -3 dB
2 x ¼" TRS jack, balanced
-20 dB to +20 dB
+22 dBu
RCA connector
10 k Ohms
+22 dBu
80 Hz / ±15 dB
2.5 kHz / ±15 dB
12 kHz / ±15 dB
¼" mono jack, unbalanced
120 Ohms
+22 dBu
X1204USB
AUX Returns
Type
Impedance 20 k Ohms balanced, 10 k Ohms unbalanced
Max. input level
Main Outputs
Type
Impedance 240 Ohms balanced, 120 Ohms balanced
Max. output level
Control Room Output
Type ¼" TS connector, unbalanced
Impedance
Max. output level
Phones Output
Type
Max. output level +19 dBu / 150 Ohms (+25 dBm)
CD/Tape Out
Type
Impedance
Max. output level
DSP (X1204USB Only)
24-bit Delta-Sigma
Converter 64/128-times
oversampling
Sampling Rate 40 kHz
Main Mix System Data (Noise)
Main mix @ -∞,
channel fader @ -∞
Main mix @ 0 dB,
channel fader @ -∞
Main mix @ 0 dB,
channel fader @ 0 dB
Power Supply
Mains voltage
Power consumption
Fuse
(100 - 230 V~, 50/60 Hz)
Mains connector
USB
Connecter
Converter
Sample Rate
Physical/Weight
Dimensions (H x W x D) 3.8 x 10.6 x 12.9" / 97 x 270 x 328 mm
Weight
1204USB
¼" TRS connector, balanced
+22 dBu
XLR, electronically balanced
+28 dBu
120 Ohms
+22 dBu
¼" TRS jack, unbalanced
RCA connector
1 k Ohms
+22 dBu
—
—
-105 dB / -108 dB A weighted
-95 dB / -97 dB A weighted
-82.5 dB / -85 dB A weighted
100 – 240 V~, 50/60 Hz
40 W
T 1.6 A H 250 V
Standard IEC receptacle
Type B
16-bit
48 kHz
8.4 lbs / 3.8 kgs