Advanced Setup - ECS A785GM-M7 User Manual

30

Advanced Setup

This page sets up more advanced information about your system. Handle this page
with caution. Any changes can affect the operation of your computer.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
HT Frequency
AMD C&Q
Enhanced Halt (C1E)
Quick Power on Self Test
Boot Up Numlock Status
APIC Mode
1st Boot Device
2nd Boot Device
3rd Boot Device
Boot Other Device
ECS eJIFFY Function
< >
HT Frequency (Auto)
This item enables users to adjust the HT frequency. The default setting is auto and we
recommend users leave the setting unchanged. Modify it at will may cause the system
to be unstable.
AMD C&Q (Auto)
This item helps the system to lower the frequency when CPU idles. When the
frequency decreases, the temperature will drop automatically as well.
Enhanced Halt (C1E) (Disabled)
This item enables or disables enhanced halt.
Quick Power on Self Test (Enabled)
Enable this item to shorten the power on testing (POST) and have your system start
up faster. You might like to enable this item after you are confident that your system
hardware is operating smoothly.
Boot Up Numlock Status (ON)
This item defines if the keyboard Num Lock key is active when your system is
started.
APIC Mode (Enabled)
This item allows you to enable or disable the APCI (Advanced Programmable Inter-
rupt Controller) mode. APIC provides symmetric multi-processing (SMP) for sys-
tems, allowing support for up to 60 processors.
Advanced Setup
Auto
Auto
Disabled
Enabled
On
Enabled
Hard Drive
CD/DVD
Removable Dev.
Yes
Disabled
: Move Enter : Select +/-/: Value
F10: Save ESC: Exit
F1: General Help
F9: Optimized Defaults
Using BIOS
Help Item
The HyperTransport
link will run at this
speed if it is slower
than or equal to the
system clock and the
board is capable.