Input Controls; Monitor Controls - Echo Layla24 Owner's Manual

Input Controls

Monitor Controls

you to "gang" (G) the faders. Ganging the faders ties them together so that they
will maintain their relative placement with regard to each other. Below each fader
is its corresponding pan control. In the default pan positions (see example below)
the signal from input 1(left) will be monitored by output 1(left), and the signal
from input 2(right) will be monitored by output 2(right). Moving a pan control
will determine how much of the input signal is sent to each output channel in the
selected output pair. Both pan controls and faders can be reset to default by
pressing the Ctrl button and left clicking on the control.
VxD console- Mia and MiaMIDI
Let's take a look at the control surface. The input
control area is located in the upper left portion of
the console surface. For each input device pair you
will find a pair of input meters. In addition, the
analog inputs have controls that allow you to select
between +4 dBu (professional) input levels or –10
dBV (consumer) input levels. Clicking on the
button will toggle back and forth between the two
levels.
Below the input channels are the input monitor
controls. These allow you to monitor the input
signal via any of the outputs on your
Mia/MiaMIDI. Each input channel pair has a
corresponding monitor control pair directly below
it on the console. At the top of each monitor pair
are radio buttons that allow you to selectively mute
(M) or solo (S) each channel. In the middle you
will find a pair of faders that will allow you to set
the levels of the monitor signals. At the bottom of
the control area there is a radio button that allows
64
VxD console – Mia and MiaMIDI