Console Controls; Monitor Controls - Echo Layla24 Owner's Manual

Console Controls

Let's take a look at the control surface. The input control area is
located in the upper left portion of the console surface. For each
input device pair you will find a pair of input meters. Each input
also has a nominal level switch that switches between professional
(+4 dBu) and consumer (–10 dBV) levels. This way you can
connect either professional or consumer gear to each input. Make
sure to set the nominal level switches to match the equipment that
you have connected to Layla24's inputs.

Monitor Controls

Below the input channels are the input monitor controls. The input monitor
controls allow you to monitor the input signal via any of the available outputs on
your Echo hardware. Each input channel pair has a corresponding monitor control
pair directly below it on the console. At the top of each monitor pair are radio
buttons that allow you to selectively mute (M) or solo (S) each channel. In the
middle you will find a pair of faders that will allow you to set the levels of the
monitor signals. At the bottom of the control area there is a radio button that allows
you to "gang" (G) the faders. Ganging the faders ties them together so that they
will maintain their relative placement with regard to each other. Below each fader
is its corresponding pan control. In the default pan positions (see example below)
the signal from input 1(left) will be monitored by output 1(left), and the signal
from input 2(right) will be monitored by output 2(right). Moving a pan control
will determine how much of the input signal is sent to each output channel in the
selected output pair. Both pan controls and faders can be reset to default by
pressing the Ctrl button and left clicking on the control.
VxD console – Gina24 and Layla24
51
VxD console – Gina24 and Layla24