Connecting To Miamidi - Echo Layla24 Owner's Manual

Connecting to MiaMIDI

Analog Inputs and Outputs
MiaMIDI has two analog outputs (OUT1 and OUT2) and two
analog inputs (IN1 and IN2) on the back. The input and output
connections can accept balanced or unbalanced jacks via ¼"
connectors. By default, both the inputs and outputs are set to
receive or send a +4 dBu signal. You can also select –10 dBV
for each individual input and output (see the description of the
console, below).
For optimum performance it is recommended that you use
balanced signals when connecting to Mia's analog connectors.
Mia uses TRS connectors (tip, ring sleeve) for connecting
balanced line level signals.
The three sections of a TRS connector are used to transmit the
three components of a balanced signal (T = plus, R = minus, S =
ground). Mia will also accommodate the two conductor unbalanced style
connector.
Audio Connections – MiaMIDI
27
Audio Connections – MiaMIDI