Right Needle - Baby Lock imagine wave BLE3ATW Instruction And Reference Manual

S

Right Needle

E
R
1. Set the needle threader selector on "R" for right needle (fig.B page 13).
Note: Be sure to push the needle threader selector all the way to R.
G
2. Place the thread on the second from left spindle on the thread stand (fig.A). Thread needle thread
guides 1 and 2, through the groove on the face plate and through guides 3, 4, 5, 6 and 7. Pull a
E
6" length of thread through guide 7.
3. Lower the presser foot to engage the tensions.
R
4. Thread into eye of needle with the needle threader.
See the chart of needle threader page 13.
5. Continue pulling the thread loop manually through the needle eye until a single stand is threaded.
Place the thread under the presser foot and to the left.
S
E
T
U
P
F,6
12
2
B
D,4
E,5
G,7
1
A
B 2
C
3
A
Handwheel