Specifications - Alpine MRV-F900 Owner's Manual

Specifications

Power Output: RMS Continuous Power (at 12.0V, 20 Hz to 20kHz):
Per channel into 4 ohms (0.08% THD):
Per channel into 2 ohms (0.3% THD):
Bridged into 4 ohms (0.3% THD):
Power Output: RMS Continuous Power (at 14.4V, 20 Hz to 20kHz):
Per channel into 4 ohms (0.08% THD):
Per channel into 2 ohms (0.3% THD):
Bridged into 4 ohms (0.3% THD):
MAX Power:
Stereo:
Bridged:
Frequency Response:
Signal-to-Noise Ratio (referenced to rated power): 105 dBA
Input Sensitivity (for rated power output):
Input Impedance:
Speaker Impedance:
Power Requirement:
Weight:
Dimensions
Width
Height
Depth
<Components>
Parts name
End Cover ................................ 1
Terminal Cover ........................ 1
Bracket ..................................... 3
Hexagon Wrench ...................... 1 SET
Self-Tapping Screw .................. 4
Machine Screw ......................... 6
Hexagon Screw ........................ 2
Double Face Tape ..................... 1 SET
Cushion .................................... 1 SET
Insulation Tube ......................... 1 SET
Fuse Box ................................. 1
Fuse (80A) ............................... 1
Due to continuous product improvement, specifications and design are subject to change
without notice.
The illustrations included in these instructions may appear different from the actual product
due to printing conditions.
Quantity
75Wx4
150Wx4
300Wx2
100Wx4
200Wx4
400Wx2
200Wx4
600Wx2
10 Hz to 60 kHz (+0, –1 dB)
500mV to 8.5V (1.0V at center detent)
10k ohms<
4 or 2 ohms (Stereo),
4 ohms (Bridged)
11 – 16V DC Negative Ground
15 kg (33 lbs. 1 oz)
650 mm (25-19/32")
85.7 mm (3-3/8")
247 mm (9-47/64")
19
-
EN