Changing The Password; Adjusting The Vga Picture - Dynex DX-LCDTV19 User Manual

07-398_DX-LCDTV19.fm Page 11 Tuesday, August 14, 2007 11:33 AM
Using your LCD TV
Movie ratings
NONE Not yet rated.
G General audiences.
PG Parental guidance suggested.
PG-13 Parents strongly cautioned. May not
be suitable for children under 13.
R Restricted. Not suitable for children
under 17 without parental
supervision.
NC-17 No suitable for children under 17.
X Adults only.
To set parental controls:
1 Press MENU, then press CH+ or CH– one or more times until the
following menu opens.
2 Press VOL+ or ENTER, then press CH+ or CH– one or more times
to select Parental Control.
3 Press VOL+ or ENTER. The Enter Password screen opens.
4 Press the number buttons to enter the password. The default
password is 0000. The Parental Control Menu screen opens.
Note: The Advanced Rating option appears only in Digital TV mode.
5 Press CH+ or CH– to select US Ratings or Canadian Rating,
then press VOL+ or ENTER. One of the following ratings screens
opens.
6 Press CH+ or CH– to select the rating you want to block, then
press ENTER. The rating you selected and all higher ratings are
blocked.

Changing the password

To change the password:
1 Press MENU, then press CH+ or CH– one or more times until the
following menu opens.
2 Press VOL+ or ENTER, then press CH+ or CH– one or more times
to select Password Set.
3 Press VOL+ or ENTER. The Enter Old Password screen opens.
4 Press the number buttons to enter the old password. If you have
not set a password, enter the default password 0000.
5 When prompted, enter the new password twice.
Note: If you change the password then forget it, enter 9443.

Adjusting the VGA picture

To adjust the VGA picture:
1 Make sure that your LCD TV is connected to a computer through
the VGA connections.
2 Press INPUT one or more times to select VGA.
3 Press MENU, then press CH+ or CH– one or more times until the
following menu opens.
4 Press VOL+ or ENTER, then press CH+ or CH– to select VGA Set.
11