Table of Contents
Advertisement
ErP Support
Determines whether to let the system consume less than 1W power in S5 (shutdown) state. (Default: Disabled)
Note: When this item is set to Enabled, the following four functions will become unavailable:
PME event wake up, power on by mouse, power on by keyboard, and wake on LAN.
2-8
PC Health Status
CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
Reset Case Open Status
Case Opened
Vcore
DDR15V
+12V
Vtt
Current System Temperature
Current CPU Temperature
Current CPU FAN Speed
Current SYSTEM FAN2 Speed
Current POWER FAN Speed
Current SYSTEM FAN1 Speed
CPU Warning Temperature
CPU FAN Fail Warning
SYSTEM FAN2 Fail Warning
POWER FAN Fail Warning
SYSTEM FAN1 Fail Warning
CPU Smart FAN Control
x Slope PWM
CPU Smart FAN Mode
: Move
Enter: Select
F5: Previous Values
Reset Case Open Status
Keeps or clears the record of previous chassis intrusion status. Enabled clears the record of previous
chassis intrusion status and the Case Opened field will show "No" at next boot. (Default: Disabled)
Case Opened
Displays the detection status of the chassis intrusion detection device attached to the motherboard CI
header. If the system chassis cover is removed, this field will show "Yes", otherwise it will show "No". To
clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to
the CMOS, and then restart your system.
Current Voltage(V) Vcore/DDR15V/+12V/Vtt
Displays the current system voltages.
Current System/CPU Temperature
Displays current system/CPU temperature.
Current CPU/SYSTEM/POWER FAN Speed (RPM)
Displays current CPU/system/power fan speed.
CPU Warning Temperature
Sets the warning threshold for CPU temperature. When CPU temperature exceeds the threshold,
BIOS will emit warning sound. Options are: Disabled (default), 60
90
C/194
F.
o
o
CPU/SYSTEM/POWER FAN Fail Warning
Allows the system to emit warning sound if the CPU/system/power fan is not connected or fails. Check
the fan condition or fan connection when this occurs. (Default: Disabled)
BIOS Setup
PC Health Status
[Disabled]
No
1.200V
1.516V
11.779V
1.076V
35
C
o
36
o
C
2039 RPM
0 RPM
0 RPM
0 RPM
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Normal]
1.75 PWM value /
C
o
[Auto]
+/-/PU/PD: Value
F10: Save
F6: Fail-Safe Defaults
- 34 -
Item Help
Menu Level
ESC: Exit
F1: General Help
F7: Optimized Defaults
C/140
F, 70
C/158
F, 80
C/176
o
o
o
o
o
F,
o
Advertisement
Table of Contents
