Bios Settings - Gigabyte W551 User Manual

3.2 BIOS Settings

The BIOS setup utility allows you to configure your computer's
basic settings. When you turn on your computer, the system reads
the configuration information and initializes hardware in order for
the system to operate properly. You can use the BIOS setup utility
to change your computer's start-up configuration. For example, you
can change the security and power management settings for your
computer.
You can only enter the BIOS setup utility only when the computer
is turned on, in another word, between the time it's turned on and
before the Windows splash screen appears. If your computer is
already turned on, reboot your computer and press the F2 key to
enter the setup utility.
►Navigating and Entering Information in BIOS◄
Use the following keys to move between fields and to enter
information:
Item
←→ Select Screen
Push the up and down arrow keys to move
↑↓ among selections, then press Enter to make a
selection.
+ - Change Option
F1 General Help
F10 Save and Exit
Description
In any area, you can simply Press Esc to exit. If
ESC you wish to exit the BIOS utility without saving
changes, go to the main menu, then press Esc.
Users are allowed to enter new values to replace the default
values in certain fields, and the rest is considered to be system
defaults and cannot be modified. To change settings in the Main
Menu, press the Enter key to enter into submenus. To return to the
previous screen, press the Esc key.
18 18