Bios Settings - Gigabyte W451U User Manual

FirstWare Recover Pro will remain in the protected area of your
computer system in case you need to run it again in the future.

3.2 BIOS Settings

The BIOS setup utility allows you to configure your computer's basic
settings. When you turn on your computer, the system reads the
configuration information and initializes hardware in order for the
system to operate properly. You can use the BIOS setup utility to
change your computer's start-up configuration. For example, you
can change the security and power management settings for your
computer.
You can only enter the BIOS setup utility only when the computer
is turned on, in another word, between the time it's turned on and
before the Windows splash screen appears. If your computer is
already turned on, reboot your computer and press the F2 key to
enter the setup utility.
►Navigating and Entering Information in BIOS◄
Use the following keys to move between fields and to enter infor-
mation:
Item
←→ Select Screen
Push the up and down arrow keys to move
↑↓ among selections, then press Enter to make
a selection.
+ - Change Option
Tab Select Field
Description
F1 General Help
F10
Save and Exit
In any area, you can simply Press Esc
to exit. If you wish to exit the BIOS utility
ESC
without saving changes, go to the main
menu, then press Esc.
Users are allowed to enter new values to replace the default values
in certain fields, and the rest is considered to be system defaults
and cannot be modified. To change settings in the Main Menu,
press the Enter key to enter into submenus. To return to the previ-
ous screen, press the Esc key.
18 18