Gigabyte W551 User Manual page 28

►Security menu◄
BIOS SETUP UTILITY
Security
Main Advanced
Supervisor Password Clear
User Password Is: Clear
HDD Password Clear
HDD Master ID 19893855
Supervisor Password [Enter]
User Password [Enter]
HDD Password [Enter]
Password on boot: [Disabled]
F1 Help ↑↓ Select Item -/+ Change Values
ESC Exit← Select Menu Enter Select►SubMenu F10 Save and Exit
Boot Info Exit
Item Specific Help
Supervisor Password
controls access to
the setup utility
F9 Setup Defaults
• Supervisor Password
A Supervisor Password is required before you set User Password.
After selecting Change Supervisor Password, enter a new pass-
word then re-enter it to confirm. The password you enter should
contain up to 6 alphanumeric characters. If you make a mistake
while entering your password, you can always press Esc to start
over.
• User Password
You can enter into the setup utility to change or remove user pass-
words; however, you can not change or remove the Supervisor
Password, nor can you access the diskette.
• HDD Password
To input, change, or disable hard drive password. When shown as
[Locked], the hard drive password currently can not be changed
or disabled. To change or disable the function, turn off the system
and enter Setup right after turning it back on.
* Please remember the password when you decide to use HDD
Password. Your notebook service center may not be able to re-
store the HDD once the password is missing.
• Password on boot
A Supervisor Password is required before you set Password on
boot.
21 21
W551 NOTEBOOK USER'S MANUAL