Table of Contents
Advertisement
After you select an option, a confirmation dialog box (identical or
similar to the one shown here) will appear.
3. Confirm that you want to continue. Click Yes to begin the
recovery process. Or—if not using the mouse—press Tab
to select and then press the space bar. (Selecting No will
bring you back to the previous screen from which you can exit
FirstWare Recover Pro.)
Start the recovery process, and the FirstWare Progress screen will
appear. No further selections are required at this time.
After running FirstWare Recover Pro, the system will be returned
to the basic factory setting. If you recover the entire hard drive (not
just a boot partition), all data (fi les) you have created and stored
on your system's hard drive, as well as all programs previously
installed will be lost.
►Monitoring the Recovery Process◄
While the FirstWare Recover Pro Progress screen is updating, you
can monitor its recovery progress.
The screen will display several types of information during the
recovery process:
• Percentage of recovery completed
• Time elapsed
• Estimated time remaining
The time it takes FirstWare Recover Pro to complete the recovery
process ranges from 15 minutes to an hour, depending on the size
of the recovery image. The more applications and utilities that were
included in the factory setup, the longer the process will take.
• Amount of data (in Kilobytes) to be recovered
Cancel—If you select Cancel, the recovery process will stop, yet
the system will become unbootable. It is recommended that you
select Cancel only when you plan to delay the recovery process.
►Successful Recovery◄
When the recovery process is successfully completed, the following
situations will take place automatically:
• The progress screen will disappear once the FirstWare Recover
progress reaches 100%.
• The computer will reboot.
• Operating system will start, and desktop will appear.
The start-up of the operating system indicates success of the
recovery process.
The operating system should now be working, and factory-installed
applications should now be available and functional. However your
personal files are no longer available. FirstWare Recover Pro will
remain in the protected area of your computer system in case you
need to run it again in the future.
17
17
W551 NOTEBOOK USER'S MANUAL
Advertisement
Table of Contents
