Product Specifications - Gigabyte GA-P67A-UD4 User Manual

1-2

Product Specifications

CPU
Chipset
Memory
Audio  Realtek ALC892 codec
 Support for S/PDIF Out
LAN
Expansion Slots 
Multi-Graphics
Technology
Storage Interface 
Hardware Installation
Support for Intel
®

Intel Core i3 processors/Intel
® ™
Intel Celeron processors in the LGA1155 package
® ®
(Go to GIGABYTE's website for the latest CPU support list.)
L3 cache varies with CPU

Intel P67 Express Chipset
®

4 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory

* Due to Windows 32-bit operating system limitation, when more than 4 GB of physical
memory is installed, the actual memory size displayed will be less than 4 GB.
Dual channel memory architecture

Support for DDR3 2133/1866/1600/1333/1066 MHz memory modules

Support for non-ECC memory modules

 Support for Extreme Memory Profile (XMP) memory modules
(Go to GIGABYTE's website for the latest supported memory speeds and
memory modules)
 High Definition Audio
 2/4/5.1/7.1-channel
 Support for Dolby
1 x Realtek RTL8111E chip (10/100/1000 Mbit)

1 x PCI Express x16 slot, running at x16 (PCIEX16)
* For optimum performance, if only one PCI Express graphics card is to be installed,
be sure to install it in the PCIEX16 slot.
1 x PCI Express x16 slot, running at x8 (PCIEX8)

* The PCIEX8 slot shares bandwidth with the PCIEX16 slot. When the PCIEX8 slot is
populated, the PCIEX16 slot will operate at up to x8 mode.
3 x PCI Express x1 slots

(All PCI Express slots conform to PCI Express 2.0 standard.)
2 x PCI slots

Support for ATI CrossFireX

* The PCIEX16 slot operates at up to x8 mode when ATI CrossFireX
Chipset:
- 2 x SATA 6Gb/s connectors (SATA3_0, SATA3_1) supporting up to 2 SATA
6Gb/s devices
- 4 x SATA 3Gb/s connectors (SATA2_2, SATA2_3, SATA2_4, SATA2_5)
supporting up to 4 SATA 3Gb/s devices
- Support for SATA RAID 0, RAID 1, RAID 5, and RAID 10
* When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s channels, the
system performance of the RAID set may vary depending on the devices being con-
nected.
Marvell 88SE9128 chip:

- 2 x eSATA 6Gb/s connectors on the back panel supporting up to 2 SATA
6Gb/s devices
- Support for SATA RAID 0 and RAID 1
Core i7 processors/Intel
™
Pentium
®
Home Theater
®
/NVIDIA SLI technology
™
- 10 -
Core i5 processors/
® ™
processors/
®
is enabled.
™