Table of Contents
Advertisement
Connectivity
To Program PBX Ports
To Program PBX Ports
When to use
Program the ports for the DEFINITY G3r and G3i PBXs after you
have established the port terminations.
Guidelines
Use the following guidelines when you program ports:
Procedural
Use the following procedures to program DEFINITY G3i and G3r
overview
PBXs for compatibility with the Proxy Agent:
On DEFINITY G3r, the system port requires a data board
and pdata board.
On DEFINITY G3i, use the following commands:
Use this
command ...
add data-module
add hunt-group
Procedure 1: System ports
Procedure 2: Analog line with modem
Procedure 3: Voice and data
Procedure 4: Data-only data module and ADU
To do this ...
Assign the type netcon to an
extension
Ad d the netcon extension as a
member of a hunt group
Issue 2 April 1996
6-11
Advertisement
Table of Contents
