Alarm Path - AT&T OneVision DEFINITY G3 Guide Installation And Connection Manual

Planning Connectivity

Alarm Path

Alarm Path
Introduction This section explains the path the alarm takes from the PBX to the
Proxy Agent.
Dial-up You can use a number of possible specific connections for dial-up
connections connections from the switch, including connections over:
Alarm The following diagram shows the correct configuration for the
reception modem that receives alarms.
Legend
The public telephone network
A private network
1
2
1. PBX
2. INADS
3. Analog public or private network
4. Modem
For a list of certified modems, contact your design
specialist.
4
3 5
Issue 2 April 1996
5-35