AFG
Oil Burner 240V
Description
The 240 volt AFG burner has technically advanced components to meet increased demand for improved burner
performance
for residential, pressure washers and light commercial applications.
available on our B2000 series chassis. The 240 volt AFG's performance-enhancing features
today's toughest heating system and pressure washer challenges.
Advanced Components
240V GeniSys Burner Control
•
CleanCut Pump
•
240V PowerLight Beckett Igniter
•
PSC Motor
•
Beckett Sound Cover (optional)
•
Electrical Ratings
Inputs:
◦
Voltage: 220-240 Vac (177 to 264 Vac)
Current: 100 mA nominal (150 mA max at 264 Vac)
◦
◦
Frequency: 50/60 Hz
Flame Retention Heads
The maximum fi ring rates shown
are for 60HZ operation. For 50HZ
operation the maximum fi ring rate for
each head is reduced by about 20%.
GeniSys Controls:
Models and Settings
Product Sheet
Outputs:
◦
Motor: 208/240 Vac, 5 full load amps (FLA), 30 locked rotor amps (LRA)
◦
Igniter: 208-240 Vac, 3 A @ 0.7 PF min
Solenoid Valve: 208-240 Vac, 1 A @ 0.7 PF min
◦
◦
Thermostat Anticipator Current: 0.1 A (if applicable)
Thermostat Voltage: 24 Vac (if applicable)
◦
Beckett GeniSys
Lockout
Control Part No.
Time
7560A 0000
15 sec
7560B 1500
15 sec
7560P 1515
15 sec
7560P 1530
15 sec
7560P 152M
15 sec
1 - Valve-on delay and motor-off delay timings on all models are programmable with Beckett snap-on
programming display. Other factory set timings are available. Contact Beckett for alternate timings.
240V
These advanced components are
Valve-on
Motor-off
delay time
1
delay time
1
-
-
15 sec
-
15 sec
15 sec
15 sec
30 sec
15 sec
2 min
RESIDENTIAL BURNERS
will help you meet
Replaces Honeywell:
R8184G
-
-
-
-