Standard Cmos Setup - ECS P45T-AD3 Manual

For the purpose of better product maintenance, the manufacture reserves the
right to change the BIOS items presented in this manual. The BIOS setup
screens shown in this chapter are for reference only and may differ from the
actual BIOS. Please visit the manufacture's website for updated manual.

Standard CMOS Setup

This option displays basic information about your system.
CMOS Setup Utility -- Copyright (C) 1985-2008, American Megatrends, Inc.
Date
Time Alarm (hh:mm:ss)
SATA1
SATA2
SATA3
SATA4
SATA5
SATA6
IDE BusMaster
Drive A:
: Move
< >
F1: General Help
Date & Time
The Date and Time items show the current date and time on the computer. If you are
running a Windows OS, these items are automatically updated whenever you make
changes to the Windows Date and Time Properties utility.
SATA1
This motherboard supports six SATA channels and each channel allows one SATA
device to be installed. Use these items to configure each device on the SATA channel.
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
SATA1
Device : Not Detected
Type
LBA/Large Mode
Block (Multi-Sector Transfer)
PIO Mode
DMA Mode
S.M.A.R.T
32Bit Data Transfer
< > : Move
F1: General Help
Standard CMOS Setup
Fri 08/15/2008
00:01:16
Use [ENTER], [TAB]
Hard Disk
or [SHIFT-TAB] to
Not Detected
select a field.
Not Detected
Not Detected
Use [+] or [-] to
Not Detected
configure system
Not Detected
Date.
Enabled
1.44 MB 3 1 / "
2
Enter : Select
+/-/: Value F10: Save ESC: Exit
F9: Load Default settings
SATA1
Auto
Auto
Auto
Auto
Auto
Auto
Enabled
Enter : Select +/-/: Value
F10: Save ESC: Exit
F9: Load Default settings
Using BIOS
Help Item
Help Item
Select the type
of device connected
to the system.
27