Table of Contents
Advertisement
22
Connecting Case Components
After you have installed the motherboard into a case, you can begin connecting the
motherboard components. Refer to the following:
1
Connect the CPU cooling fan cable to CPU_FAN1.
2
Connect the system cooling fan connector to SYS_FAN1.
3
Connect the case cooling fan connector to CASE_FAN.
4
Connect the standard power supply connector to ATX_POWER.
5
Connect the auxiliary case power supply connector to ATX12V.
6
Connect the case switches and indicator LEDs to the F_PANEL.
7
Connect the case speaker cable to SPK.
Connecting 24-pin power cable
The ATX 24-pin connector allows you to connect to ATX v2.x power
supply.
24-pin power cable
Connecting 4-pin power cable
The ATX12V power connector is used to provide power to the CPU.
4-pin power cable
With ATX v2.x power supply, users please note
that when installing 24-pin power cable, the
latches of power cable and the ATX_POWER
match perfectly.
When installing 4-pin power cable, the latches
of power cable and the ATX12V match per-
fectly.
Installing the Motherboard
Advertisement
Table of Contents
