Installing Hardware; Installing Software - Creative Digital MP3 Player 2 User Manual

DigMP3.book Page 6 Friday, April 12, 2002 3:26 PM

Installing hardware

1. Connect the USB cable to the USB port in your computer as shown in Figure 3.
2
1
USB cable
Figure 3: Connecting the USB cable.
2. Connect the other end of the USB cable to the USB connector on your player.

Installing software

You need to install device drivers and Digital Audio Manager to use the Creative
Digital MP3 Player 2. To install these drivers and Digital Audio Manager, use the
following instructions. The instructions are applicable to all supported Windows
operating systems.
1. After you have connected the player to the computer, turn on your computer.
2. Insert the Installation CD into your CD-ROM drive.
The disc supports Windows Autoplay mode and starts running automatically.
3. Follow the on screen instructions to complete the installation.
4. When prompted, restart your system.
6