Installing Or Removing The External Memory - Creative Digital MP3 Player 2 User Manual

DigMP3.book Page 16 Friday, April 12, 2002 3:26 PM

Installing or Removing the External Memory

To install the external MMC, do the following:
1. Press the Stop button for more than
2 seconds to turn of your player.
2. Holding the player in one hand, push
and lift the MMC Memory Slot
compartment cover catch upwards as
shown in Figure 7.
3. Insert the MMC into the MMC
Memory slot. Make sure that the
card is facing the correct direction
and that it is inserted all the way in.
4. Close the compartment cover.
5. Press the Play button to turn on the player. The MMC icon on the LCD screen
should appear.
To remove the external MMC, do the following:
1. Press the Stop button for more than 2
seconds to turn of your player.
2. Holding the player in one hand, push
and lift the MMC Memory Slot
compartment cover catch upwards.
3. Push the lever next to the MMC
Memory Slot compartment with a
sharp, pointed material as shown in
Figure 8. The MMC slides out.
4. Carefully remove the MMC, and then close the compartment cover.
5. Press the Play button to turn on the player. The MMC icon on the LCD screen
should not appear.
Figure 7: Opening the MMC Memory Slot
compartment.
Figure 8: Removing the MMC .
16