Connecting To The Mains Terminal - Electrolux EOU 6330 Owner's Manual

Electrolux built-under electric double oven owner's manual

Hide thumbs Also See for EOU 6330:

Table of Contents

INSTALLATION INSTRUCTIONS

CONNECTING TO THE MAINS TERMINAL

Warning: This appliance must be earthed.

We recommend you use a new length of 6mm

core and earthed cable to ensure your safety.

Make connection as shown in Fig. 12 by proceeding

as follows:-

Preform wires to the appropriate shape to suit fitting

into the mains terminal block.

Strip inner insulation on wires using wirestrippers.

Twist the bared wires using pliers.

Cut bared wires 10mm away from the end of the

inner insulation. Where uninsulated Earth wires are

used ensure they are suitably sheathed to leave

10mm bare wire to fit into the terminal.

Clamp bare wires into the relevant terminal and

check they are held by tugging each one in turn.

Clamp the mains cable securely ensuring 5mm of

the outer insulation is inside the terminal block and

that the wires are not taught but not so slack as to

cause any fouling. See Fig. 12.

Connect the remaining end to the mains cable to the

cooker point/junction box.

Place fuse/miniature circuit breaker in circuit and

switch on at mains.

twin

Fig.12

Table of Contents

Show Quick Links

Table of Contents