To Remove Cover Of Mains Terminal - Electrolux EOU 6330 Owner's Manual

INSTALLATION INSTRUCTIONS

TO REMOVE COVER OF MAINS TERMINAL

From the rear of the appliance, remove mains input
terminal cover to gain access to terminal block.
·
First remove retaining
screwdriver. See Fig. 9.
·
Prise cover loose using screwdriver in position (1)
then lever off with screwdriver in position (2) at
either side. See Fig. 10.
·
Lift cover and remove screw from cable clamp. See
Fig. 11.
NOTES
screw with pozidrive
Fig. 9
Fig.10
Fig.11
39