To Clean The Inner Door Glass; Cleaning Inside The Ovens; Care Of Stayclean Surfaces; To Remove The Wirework Runners - Electrolux EOU 6330 Owner's Manual

TO CLEAN THE INNER GLASS DOOR
The inner glass door is not removable. Clean using
hot soapy water or Hob Brite and a soft cloth. DO
NOT use abrasives as they may damage the glass or
seal.

CLEANING INSIDE THE OVENS

The vitreous enamel coating in the ovens can be
cleaned using normal oven cleaners or aerosol oven
cleaners with care. Ensure that the manufacturers
instructions are followed and that all parts are well
rinsed afterwards.
Aerosol cleaners must not come into contact with
elements or the door seal as this may cause
damage.

CARE OF STAYCLEAN SURFACES

The back panel of the fan oven is coated with a
Stayclean finish. This should not be cleaned
manually.
Aerosol cleaners must not be used on Stayclean
surfaces and must not come into contact with
elements or the door seal, as this may cause
damage.
During normal use the Stayclean coating will become
splashed with fats and food residues. By running the
oven without food, the Stayclean surfaces burn off
any soilage.

TO REMOVE THE WIREWORK RUNNERS

The wirework runners in both ovens can be removed
for cleaning.
1. Remove all shelves and furniture from the oven.
2. Hold the wirework at the bottom, unclip from the
cavity side and gently pull towards the centre of
the oven.
3. Unhook the runner at the top and remove it from
the cavity.
4. To replace, hook the wirework back into the oven
sides.
Ensure that the wirework runners are
firmly in place before refitting the oven
shelves.
CLEANING THE SHELVES, WIREWORK
RUNNERS AND GRILL/OVEN FURNITURE
All removable parts, except the grill pan handle, can
be washed in the dishwasher.
The meat tin, grill pan, grill pan grid, oven shelves
and wirework runners may be cleaned using a soap
impregnated steel wool pad.
soapy water will make cleaning easier.
Soaking first in hot
SIDE PANEL
28
CAVITY CENTRE