Fluke 123 User Manual page 41

Recalling Screens and Setups
To recall a screen and setups, do the following:
Open the SAVE/PRINT menu.
Highlight RECALL ...
Open the RECALL ... submenu.
Already filled memory locations
are indicated with a closed square
( ).
Saving and Recalling a Setup and a Screen
Highlight memory 7.
View the saved screen and
belonging settings.
Observe that the recalled waveform is displayed and that
HOLD appears on the screen. From this point you can use
cursors for analysis or you can print the recalled screen.
The instrument returns to signal acquisition if you press
the HOLD/RUN key. The settings such as stored in
memory location 7 are used then.
1
Using The Test Tool
33