Specifications - ESI ESP1010 Manual

ESP1010

11. Specifications

<Analog Audio>
1. Analog Inputs
1) Connector Type:
2) Peak level:
3) Impedance:
4) Att. & Gain Control:
2. Analog Ouputs
1) Connector Type:
2) Peak level:
3) Impedance:
4) Attenuation Control:
3. Mic Preamplifier
1) Peak level:
2) Gain Adjustment:
3) +12V phantom power supply from PCI Card
+48V phantom power supply from RACK (XLR connector only)
4. Headphone Amplifier
1) Load Impedance Range:
2) Output Power:
<Digital Audio>
1/4" female TRS-type, balanced or unbalanced (ch 1~8)
0dBFS @ +6.5dBV (-10dBV nominal)
10k ohms minimum
-60dB ~ +15dB (0.5dB step size) *ch1, 2ch only
1/4" female TS-type, unbalanced (ch 1~8)
+6.2dBV @ 0dBFS (-10dBV nominal)
100 ohms
-60dB ~ 0dB (0.5dB step size)
0dBFS @ -40dBV
Gain +31dB up + -60 ~ +15dB (0.5dB step size)
32-300 ohm (for the best performance)
125mW @ 32ohm per channel
- 29 - 29