Software Installation - ESI ESP1010 Manual

ESP1010

7. Software Installation

After completing the hardware installation, you need to install the Windows
driver. The installation steps in Windows 2000 and Windows XP vary, but they
are similar between the different versions of Windows. The installation steps
shown below are based on Windows XP installation.
Note: Depending on your system, you may need the Windows installation CD.
1. Turn on your computer. Windows will automatically detect a new device and
prompt you with Found New Hardware Wizard screen. Choose "Install from a
list or specific location" and click Next.
2. Choose "Search for the best driver in these locations" and specify the
location of the driver. Insert the provided driver CD into the CD-Rom drive and
select "Include this location in the search" and click Browse to find the driver's
location. For example, it is D:\ESI\driver\esp1010\, if D:\ is your CD-Rom drive.
- 11 - 11