Checking Jumper Settings; Jumper Settings - ECS H55H-CM Manual

Checking Jumper Settings

The following illustration shows the location of the motherboard jumpers. Pin 1 is
labeled.

Jumper Settings

Jumper Type Description
CLR_CMOS 3-pin Clear CMOS
To avoid the system unstability after clearing CMOS, we recommend users to
enter the main BIOS setting page to "Load Default Settings" and then
"Save and Exit Setup".
Installing the Motherboard
Setting (default)
1-2: NORMAL
1
2-3: CLEAR CMOS
Before clearing the CLR_CMOS
CMOS, make sure to
turn off the system.
9