Memory Position Recall - Dodge Durango Owner's Manual

138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
4. Turn on the radio and set the radio station presets (up
to 10 AM and 10 FM stations can be set).
5. Adjust the Automatic Temperature Control (ATC)
while the ATC is in Auto mode.
6. Press and release the SET button located on the
driver's door.
7. Within five seconds, press and release memory button
1 or 2 on the driver's door. The next steps must be
performed within 10 seconds if you desire to also use a
RKE transmitter to recall memory positions.
8. Turn the vehicle off and remove the key.
9. Press and release the LOCK button on one of the RKE
transmitters.
10. Insert the ignition key and turn the ignition switch to
the ON position.
11. Repeat the above steps to set the next memory
position using the other numbered memory button or to
link another RKE transmitter to memory.
NOTE: A chime sound may be heard if Setting Memory
was inhibited for any reason.

Memory Position Recall

NOTE:
The driver's seat belt must be unbuckled to recall
memory positions.
The vehicle must be in PARK to recall memory posi-
tions.
Not all motors may be moved at one time. Please refer
to the eight-way power seat description in this section.