To Lock The Doors And Liftgate; Horn Chirp Programming - Dodge Durango Owner's Manual

2009
Hide thumbs Also See for Durango:
Table of Contents

Advertisement

22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
3. Release both buttons at the same time.
4. Test the feature while outside of the vehicle, by
pressing the LOCK/UNLOCK button on the RKE trans-
mitter.
NOTE: Pressing the LOCK button on the RKE transmit-
ter while you are inside the vehicle will activate the
security alarm. Opening a door with the security alarm
activated will cause the alarm to sound. Press the UN-
LOCK button to deactivate the security alarm.
5. If the desired programming was not achieved or to
reactivate this feature, repeat the above steps.

To Lock the Doors and Liftgate

Press and release the LOCK button on the RKE transmit-
ter to lock all doors and liftgate. If the ignition is OFF
when the doors are locked, the parking lights will flash
once and the horn will chirp once.

Horn Chirp Programming

The horn chirp feature will be activated when shipped
from the assembly plants. If desired, this feature can be
disabled by following these procedures:
For vehicles equipped with the Electronic Vehicle
Information Center (EVIC), refer to "Personal Settings
(Customer Programmable Features)" under "Over-
head Console with Electronic Vehicle Information
Center (EVIC) – If Equipped" in Section 3.
For vehicles not equipped with the EVIC:
1. Press and hold the LOCK button on the RKE trans-
mitter.
2. After holding the RKE transmitter LOCK button for
four seconds, also press the RKE transmitter PANIC
button within six seconds.
3. Release both buttons at the same time.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Durango 2009

Table of Contents