Programming The Memory Feature; Memory Position Recall; Seats; Manual Adjustment Front Seats - If Equipped - Dodge HORNET 2024 Owner's Manual

46 GETTING TO KNOW YOUR VEHICLE
The memory setting switch is located on the driver's
door trim panel. The switch consists of three buttons:
•
The (1) and (3) buttons which are used to recall
either of two saved memory profiles.
•
The set (2) button, which is used to activate the
memory save function.
PROGRAMMING THE MEMORY
FEATURE
To create a new memory profile, perform the following:
NOTE:
Saving a new memory profile will erase an existing pro-
file from memory.
1. Place the vehicle's ignition in the ON position.
2. Adjust all memory profile settings to desired prefer-
ences (i.e., seat and radio station presets).
3. Push and release the (2) button on the memory
switch, and then push the desired memory profile
button (1 or 3) within five seconds and hold for five
seconds. A beep will sound to confirm the memory
profile has been successfully stored.

MEMORY POSITION RECALL

To recall the memory settings for driver one or two,
push the desired memory button number (1 or 3).
NOTE:
•
Recalling a memory setting profile can also be done
about 20 minutes after the doors are opened and
about 20 minutes after the engine is stopped.
•
The movement of the seat is suspended if the
engine is started following the recall.

SEATS

Seats are a part of the Occupant Restraint system of
the vehicle.
WARNING!
•
It is dangerous to ride in a cargo area, inside or
outside of a vehicle. In a collision, people riding in
these areas are more likely to be seriously injured
or killed.
•
Do not allow people to ride in any area of your
vehicle that is not equipped with seats and seat
belts. In a collision, people riding in these areas
are more likely to be seriously injured or killed.
•
Be sure everyone in your vehicle is in a seat and
using a seat belt properly.
MANUAL ADJUSTMENT FRONT
SEATS — IF EQUIPPED
Manual Seat Adjustment
1 — Forward/Rearward Adjustment Bar
2 — Height Adjustment Lever
3 — Recline Adjustment Lever
4 — Power Lumbar Adjustment (If Equipped)
Manual Front Seat Forward/Rearward
Adjustment
Some models may be equipped with manual front
seats. The seats can be adjusted forward or rearward
by using a bar located by the front of the seat cushion,
near the floor.
While sitting in the seat, lift up on the bar and move the
seat forward or rearward. Release the bar once you
have reached the desired position. Then, using body
pressure, move forward and rearward on the seat to be
sure that the seat adjusters have latched.