Input Mode - Denon AVR-591 Owner's Manual

Setting items
Component Comp1 (Component video)
Set this to change the None : Do not assign a component video input connector to the selected
component video input input source.
connectors assigned to the
input sources. • At time of purchase, the settings of the different input sources are as
shown below.
BD DVD TV
SAT/CBL GAME Input source
V.AUX DOCK
Default
setting
• An input source to which an component video input connector cannot be
assigned is displayed as "–".
• Even if a component input connector is assigned to the input source
"DOCK", "DOCK" is effective when a control dock for iPod is connected.
Default Yes : Reset to the defaults.
The "Input Assign" settings No : Do not reset to the defaults.
are returned to the default
If you select "Default" and press
settings.
Setting?" is displayed. Select "Yes" or "No", and then press
Video
Set the source video.
z"BD", "TV" or "GAME" can be set when "HDMI" (vpage 38) or "Component" (vpage 39) has been
assigned.
Setting items
Source : Play the picture and sound of the input source.
Video Select
Video of another input BD / DVD / TV / SAT/CBL / GAME / V.AUX / DOCK : Select video input
source is played back source to view. This can be set for individual input sources.
combined with the playing
"BD", "TV" and "GAME" can be selected only when a component
audio.
video connector is assigned as an input source.
NOTE
• It is not possible to select HDMI input signals.
• Input sources for which "Delete" is selected at "Source Delete"
(vpage 49) cannot be selected.
Remote control operation
buttons
Setting details
SAT/
BD DVD TV GAME V.AUX
CBL
Component
None None None None None
1
ENTER
, the message "Default
Default settings are underlined.
Setting details
Move the cursor
(Up/Down/Left/Right)
Setting items
Video Select
(Continued)
DOCK
None
Video Mode Auto : Process video automatically based on the HDMI content
Make settings for video information.
processing. Movie : Process video normally.
Game : Always process video appropriate for game content.
BD z DVD z
TV
GAME z
SAT/CBL
V.AUX DOCK
ENTER
.

Input Mode

The input modes available for selection may vary depending on the input source.
Setting items
Input Mode Auto : Automatically detect input signal and perform playback.
Set the audio input modes HDMI : Play only signals from HDMI input.
for the different input Digital : Play only signals from digital input.
sources. Analog : Play only signals from analog input.
• "HDMI" can be set for input sources for which "HDMI" is assigned at
• "Digital" can be set for input sources for which "Digital" is assigned at
• If the input source is set to "TV" or "Game", it cannot be set to "Analog".
• When digital signals are properly input, the
• If "HDMI Control" is set to "ON" and a TV compatible with the ARC is
Confirm the setting
Setting details
Buttons on the remote control unit or main unit
can be used for operations.
GOperations with the remote control unitH
V.SEL
Press until the desired picture appears.
V.SEL
• To cancel, press to select "Source".
GOperations with the main unitH
VIDEO SELECT
Press until the desired
picture appears.
VIDEO SELECT
• To cancel, press to
select "Source".
If "Video Mode" is set to "Auto", the mode is switched according to
the input contents.
Default settings are underlined.
Setting details
"Input Assign" (vpage 38).
"Input Assign" (vpage 38).
the display. If the indicator does not light, check the digital input
connector assignment and the connections.
connected via the HDMI MONITOR connectors, the input mode whose
input source is "TV" is fixed to ARC.
Return to previous menu
ENGLISH
Input Setup
indicator lights on
39