Section A - Appendix; Factory Reset; Driverack Pa+ Power-Up Button Functions; Power Up Quick Key Options - dbx DriveRack PA User Manual

Section A

Section A - Appendix

28
Appendix
A.1 Factory Reset
In the event that a reset is required, the DriveRack® PA+ offers you the option of performing
a "Soft" or "Hard" reset. The Soft Reset resets all operating parameters except user presets.
The Hard Reset Procedure will reset all presets information back to the factory defaults.
A.2 DriveRack PA+ Power-Up Button Functions
All Power-Up Functions require a button(s) to be pressed and held as the unit power is turned
on.
Factory ("Hard") Reset.
Press and hold the STORE button at power-up until the following message appears:
• Pressing the PREV PG button will start a Factory Reset (All User Presets will be restored to
the Factory Presets, all Utility settings will be defaulted, and all Security settings will be
defaulted).
• Pressing the PRESET/RECALL button will abort the Factory Reset sequence and the unit
will reset normally.
System ("SOFT") Reset
• Press and hold the UTILITY button at power-up until the following message appears:
• Pressing the PREV PG button will start a System Reset (All Utility settings will be
defaulted.)
• Pressing the PRESET/RECALL button will abort the System Reset sequence and the unit
will reset normally.
A.3 Power Up Quick Key Options
The DriveRackPA+ offers several "Quick Key" options for initial power up and are as follow:
Change Initial Preset Number
• To change the initial power up preset number, Press and hold the PRESET/RECALL button
at power-up until the following message appears:
DriveRack
"! HARD RESET?"
"Yes <PREV PAGE>"
"No <PRESET>"
"! SOFT RESET?"
"Yes <PREV PAGE>"
"No <PRESET>"
PA+
®