DriveRack
3.5 Navigating the Crossover Section
To edit the parameters of the Crossover used in a selected preset, simply use the following procedure. From preset mode,
press the XOVER button. Once you have reached the Crossover module, Navigate through the Pages of the selected Crossover
module by pressing the "Next Page" or "Prev Page" buttons successively until arriving at the desired Page.
XOVER
Freq- Out to 20 kHz
Type -BW6-24,LR12,24
Gain- Inf to 20dB
Successive presses of the Data Wheel will toggle between
effect parameters within the currently selected page.
Navigating the Advanced Feedback Supression (AFS) Section
3.6 Navigating the AFS (Advanced Feedback Suppression) Section
From preset mode, press the FEEDBACK button. Pressing the Data Wheel will select the parameter to be edited.
<PREV PG
NEXT PG>
The PREV PG and NEXT PG
buttons scroll through
the pages of the selected module.
PA+
®
High Pass
Low Pass
Freq- 20 Hz to Out
Freq- Out to 20 kHz
Type- BW6-24,LR12,24
Type- BW6-24,LR12,24
Gain- Inf to 20dB
Low
Low
FEEDBACK
AFS On/Off
AFS Clear
Successive presses of the Data Wheel will toggle between
parameters within the currently selected page.
Type (BS,BW,L-R)
Type (BS,BW,L-R)
Frequency
Frequency
Slope
Slope
SSub >
<SSub
Editing Functions
High Pass
Low Pass
High Pass
Freq- 20 Hz to Out
Freq- Out to 20 kHz
Type- BW6-24,LR12,24
Type- BW6-24,LR12,24
Gain- Inf to 20dB
Mid
Mid
High
Mode - Fixed/Live
Type- Speech, Low,Med and High
Number of Fixed filters 0-12
Section 3
XOVER
FEEDBACK
Live filter Lift - On/Off
Lift After - 0-60
11