Chrysler Sebring Convertible Owner's Manual page 163

If the indicator light blinks rapidly for two seconds and
then turns to a constant light, proceed to Step 5 "Pro-
gramming A Rolling Code System."
5. Programming A Rolling Code System
At the garage door opener motor (in the garage), locate
the "Learn" or "Training" button.
This can usually be found where the hanging antenna
wire is attached to the garage door opener motor. It is
NOT the button normally used to open and close the
door.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161
Training The Garage Door Opener
1 — Door Opener
2 — Training Button
6. Firmly press and release the "Learn" or "Training"
button. The name and color of the button may vary by
manufacturer.
3