Chrysler Sebring Sedan Specifications

Note: Information shown is based on data available at time of publication (September 1, 2009).
Specifications are valid for Europe and may vary in other international markets. Vehicle model availability
may change per individual markets.
Chrysler Sebring Sedan

SPECIFICATIONS

Dimensions are in millimeters (inches) unless otherwise noted.
GENERAL INFORMATION
Body Style
Assembly Plant
Vehicle Class
ENGINE: 2.0-LITER TURBO DIESEL DOHC 16-VALVE
Availability
Type and Description
Displacement
Bore x Stroke
Valve System
Fuel Injection
Construction
Compression Ratio
Power
Torque
Max. Engine Speed
Fuel Requirement
Oil Capacity
Coolant Capacity
Emission Controls
Emission Class
Fuel Consumption
Urban Cycle
Ex-urban Cycle
Combined Cycle
CO2 Emissions
Information is current as of September 1, 2009
Four-door sedan
Sterling Heights Assembly, Mich.
D-Segment
Available on all Sebring models
Four cylinders in-line, turbocharged, high-pressure, direct injection
1968 cu. cm (120.1 cu. in.)
81 x 95.5 mm (3.19 x 3.76)
Belt-driven DOHC, 16-valve
Electronically controlled, high-pressure direct injection
Cast-iron block, cast aluminum cylinder head, cast aluminum ladder
frame, forged steel crankshaft
18.0:1
103 kW (140 hp DIN) @ 4000 rpm (70.0 hp DIN/L)
310 N•m (229 lb.-ft.) @ 1750 – 2500 rpm
5000 rpm (electronically limited)
49 cetane diesel, DIN EN590
4.2 L (4.4 qt.) with dry filter
4.0 L (4.2 qt.)
Oxy-catalyst with integrated Diesel-particulate Filter (DPF) and cooled
Exhaust-gas Recirculation (EGR)
Euro IV
8.2 L/100 km (6-mtx); 8.7 L/100 km (DCT)
5.1 L/100 km (6-mtx); 5.6 L/100 km (DCT)
6.2 L/100 km (6-mtx); 6.8 L/100 km (DCT)
164 g/km (6-mtx); 178 g/km (DCT)
4
SEBRING SEDAN
www.media.chrysler.com