Bernina Artista 165 Instruction Manual page 42

42 Memory
Saving memory contents/leave memory
Open individual memory
Memory capacity
Inserting a stitch in memory
· place cursor where the stitch is to
be inserted
· select stitch/letter
· the new stitch is inserted to the left
of the cursor
Save and leave memory
· touch store
· the contents are saved
· the memory can be opened and
viewed at any time
· touch external mem button
Turning off machine without saving
· memory contents will be lost if the
machine is turned off without
touching store
Returning to a previously
programmed memory bank
· open memory by pressing the
external mem button
· touch mem 1 on the functions
toolbar
Note: if the machine has been
turned off since the last time the
memory feature was used, mem 1
will show on the screen when the
memory is activated. If the machine
has not been turned off, the last
memory bank opened will show.
· an overview of the memory banks
appear on the screen
· the open memory bank is
highlighted (dark gray)
· the occupied memory banks are
displayed in light gray
Open mem screen
· open memory by pressing the
external mem button
· touch mem on the functions toolbar
· the memory bank screen appears
· the total capacity used by stored
stitch patterns is shown in % in the
top row
· total capacity of all memory banks
together is 1023 stitches
030787.52.04_0401_a165_EN
· empty memory banks are shown in
white
· memory banks can be scrolled if
more than 15 are occupied (can be
up to 255 memory banks)
· select an occupied memory bank
· the contents are shown in the
memory
· touch esc to return to the previous
screen
· the contents of the selected
memory remain active
· you can sew, insert, or correct these
contents
Note: Contents of memory should be
sewn from a stitch screen, not the
memory storage screen.