Bernina Artista 165 Instruction Manual page 114

40 Combining decorative stitches with functions
Using decorative stitches with functions
Stitch:
Needle:
Thread:
Feed-dog:
Presser foot:
Any decorative stitch
size and type suitable for the fabric selected
cotton or rayon embroidery
up (sewing position)
Reverse pattern foot No. 1 or
Embroidery foot No. 6 or
Open embroidery foot No. 20 (optional accessory)
Combining basic settings and functions
· you can achieve some exciting effects by combining basic
settings with various functions
Horizontal mirror image
Vertical mirror image
Pattern end 1–9x
Half pattern
Balance
Long stitch function
Double needle limitation 2–5 mm
Wing needle limitation
Continuous reverse sewing
Pattern extend 2–5x
Balance
· use balance to obtain variations on
stitches
· the stitch will be stretched open or
compressed, depending on the number
of balance steps
· for additional information on the balance
function, see page 44
Method
· select stitch
· select function
· several functions can be activated for one stitch
Deleting functions
· press the external clr button
· delete special functions individually by touching the
appropriate symbol
030787.52.04_0401_a165_EN
TIPS
Variations with basic settings
and functions
· before starting a new
combination, clear all
functions previously used
Decorative stitches on single
layer fabric
· always use stabilizer
· remove stabilizer after sewing
Activate needle stop down
when sewing long rows of
stitches
· needle stays in fabric when
stopping to reposition work
Single Pattern
· the machine stops auto-
matically at the end of
each individual stitch pattern