Bernina Artista 165 Instruction Manual page 39

Programming stitches
Programming stitches by number
Programming
· select the desired stitch
· make any desired adjustments to
stitch width, stitch length, and
needle position
· open the memory by pressing the
external mem button
· touch mem 1 to access the memory
storage screen
Note: if the machine has been
turned off since the last time the
memory feature was used, mem 1
Continue programming
· select the next desired stitch
· the stitch appears in the mem field
· continue in this manner
· start sewing; when the foot control
is pressed, the cursor will go to the
beginning of the stitch combination
for sewing the complete grouping
Note: if the contents of the memory
have been changed using the edit
function (page 40), the Pattern
begin function must be selected to
start the stitching at the beginning
of the combination.
Scroll memory
· scroll arrows are to the right and
left of the memory bar
· touch to view the programmed
contents either forward or
backward
· to close the memory, press the
external memory button
· if the stitch combination has not
been saved, a message screen will
appear asking if you would like to
save it
Stitches by number
· open memory
· touch function 0–9
· numbers appear on the screen
· the memory bar remains visible
· touch numbers to select stitch
· the number selected appears above
the other numbers
Confirm and continue programming
· touch OK to confirm
· the stitch selected appears in the
memory bar
· touch store to save in memory
· select the next stitch by pressing
the appropriate number and
proceed as above
030787.52.04_0401_a165_EN
Memory
will show on the screen when the
memory is activated. If the machine
has not been turned off, the last
memory bank opened will show.
· select an empty memory bank
· touch OK to return to the previous
screen
· select the desired stitch
· the stitch appears in the mem field
· the cursor moves to the right as
stitches are selected
· use Pattern end to stop
automatically
Toolbar function – Pattern end will
stop after the selected number of
combinations have been stitched
External button – Pattern end will
stop after stitching the stitch
pattern to the left of the cursor
· to save, touch store
· store will blink once to indicate it is
saving
Correct
· touch delete if you make a mistake
· the cursor moves to the left and
deletes the number
· select new number
39