Switches And Jumpers - Asus P4B533-V User Manual

2.7

Switches and jumpers

The motherboard frequency is adjusted through the DIP switches. The
white block represents the switch position. The illustration below shows
the ON and OFF positions of the switches.
P4B533-V
®
P4B533-V DIP Switches
Set the JEN jumper to pins 1-2 (jumper mode) and the PSBSEL1
jumper to pins 2-3 (DSW1) if you wish to use the DSW1 switches.
Otherwise, setting the switches does not produce any effect.
1. JumperFree™ mode (JEN1)
This jumper allows you to enable or disable the JumperFree™ mode.
The JumperFree mode allows you to change CPU settings through the
BIOS setup instead of using the DIP switches.
P4B533-V
®
P4B533-V
JumperFree™ Mode Setting
The JEN jumper is set in conjunction with the DSW1 switches. In
JumperFree mode, set DSW1 switches as shown above.
2-16
DSW1
1.Frequency Selection
2.Frequency Selection
3.Frequency Selection
4.Frequency Selection
5.Frequency Selection
ON OFF
1.Frequency Multiple
DSW2
2.Frequency Multiple
3.Frequency Multiple
4.Frequency Multiple
OFF ON
JEN1
1 2
Jumper Mode Jumper Free
Chapter 2: Hardware information
DSW1
2 3
(Default)