Switches And Jumpers - Asus A7S333 User Manual

2.7

Switches and jumpers

The jumpers and switches on the motherboard allow you to change some
feature settings to suit your customized system configuration.
Motherboard Frequency Settings (DSW Switches)
The motherboard frequency is adjusted through the DSW switches.
The illustration below shows the default position:
®
A7S333
A7S333 DIP Switches
IMPORTANT!
settings, the JEN jumper must be reset to pins 1-2 for jumper mode.
Otherwise, setting the DSW switches does not produce any effect.
1) JumperFree™ Mode (3 pin JEN)
This jumper allows you to enable or disable the JumperFree™ mode. The
JumperFree™ mode allows processor settings to be made through the BIOS
setup.
®
A7S333
A7S333 JumperFree™ Mode Setting
NOTE!
JumperFree™ mode, set all DIP switches (DIP_SW) to OFF.
ASUS A7S333 motherboard user guide
1.Frequency Selection
2.Frequency Selection
3.Frequency Selection
4.Frequency Selection
To use the DSW switches to make changes to speed
The JEN jumper is set in conjunction with the DIP switches. In
DSW
JEN
DSW
1 2
Jumper Mode Jumper Free
(Default)
2 3
21