Set Temperature Level And Span; Set Ir-Fusion® Blend Level - Fluke TiR4 User Manual

Set Temperature Level and Span

1. Press G as shown in Figure 1-6 to automatically set the camera's
temperature level and span.
2. Press G again as needed to properly scale the image.
Level & Span
Set IR-Fusion® Blend Level
IR-Fusion® blending is disabled with optional 10 and 54-mm lenses.
1. Press and hold G until the IR-Fusion
the display screen.
2. While continuing to press G, use the mouse controller shown in
Figure 1-7 to slide the IR-Fusion
desired setting.
3. Tap the trigger button ( ) to retain settings.
Set Temperature Level and Span
Figure 1-6. Setting the Level and Span
Note
®
blend level dialog box appears on
®
blend level bar in the dialog box to the
Introduction
1
eii006.eps
1-9