Maintenance - Euro-Pro 9105 Instruction Manual

MAINTENANCE

Attention: Disconnect the machine from the wall outlet before carrying out any maintenance.
Cleaning the shuttle
If lint and bits of thread accumulate in the hook, this will interfere with the smooth operation of the
machine. Check regularly and clean the stitching mechanism when necessary.
A-1
A. Bobbin holder
1. Remove the bobbin cover plate and bobbin.
2. Clean the bobbin holder with a brush.
B-1
B-3
B. Hook race and feed dog
1. Remove the needle, presser foot and presser foot holder. Remove the bobbin cover plate and
bobbin. Remove the screw holding the needle plate and remove the needle plate.
2. Lift up bobbin case and remove it.
3. Clean the hook race, feed dog and bobbin case with a brush. Also clean them, using a soft, dry
cloth.
4. Replace the bobbin case into the hook race so that the tip (a) fits to the stopper (b) as shown.
A-2
B-2
B-4
47
a
b