Table of Contents
Advertisement
MEMORY
Sew Prog.
Sew Prog.
4.
You can use the Auto-Lock
Attention: The Auto-Lock can not be set if one of the pattern 1~4 is being selected as the
first programmed stitch.
5. You can continue your programming even after having pressed
machine stops automatically and fastens the thread in every position where you have
programmed Auto-Stop. Just press the foot control again and the machine will sew the rest of
what you have programmed.
6. If you wish to repeat your stitch combination without having the machine stop press the
button to cancel the Auto-Stop in
7. If you should forget to enter the Auto-Stop function in
Auto-Stop button in
Sewing sample
Press the
button to
wish with the exception of pattern 14~17. This way you can combine different stitches according
to your own taste and imagination. Press the
program. The machine will be positioned at the first programmed stitch. Press the foot control to
begin sewing. You can try the memory program illustrated below.
Program
Sewing sample
ex.1
ex.2
ex.3
Sew Prog.
function when the sewing machine is stopped.
Program
position. But the Auto-Stop function will not be memorized in the program.
Sew Prog.
Sew Prog.
position. Press
Start to sewing
1. Press
for
Sew Prog.
positioned at the first programmed stitch.
2. Press foot controller. The machine will start to sew
from first entered pattern. On the LCD screen,
sewing stitch data is indicated.
3. If you wish to check what is programmed or if you
wish to start sewing a few stitches into the program,
use the
button or
position. The
will disappear from the LCD screen.
Program
to empty the memory. Select any stitches you
button to the
21
position. The machine will be
button
. Then, when sewing, the
position it is also possible to use the
position to sew your
Sew Prog.
LCD screen
Programming direction
Hide quick links:
Advertisement
Table of Contents
