Table of Contents
Advertisement
MaXiO series
2.1.2 M.D.I connector
The M.D.I connection can handle 32 digital input and 32 digital output streams for the extension of
MaXiO 032 breakout box.
* In the basic MaXiO XD system, the MaXiO PCI/PCIe card connects to the special M.D.I
breakout cable (described below).
2.2 EX8000
2.2.1 Front Panel Input Channel Section
1
Analog Balanced XLR / TRS (Combo) Input Connector
EX8000 provides 8 combo connectors (XLR and 1/4" TRS) on
the front panel that are used as balanced analog inputs for line
level signals and microphone connection (via XLR).
2
Microphone Input Selection Switch
Every input channel can be used for line level or microphone
signals. When this switch is enabled, a microphone can be
connected via XLR. In this case phantom power is supplied
(when enabled, check
XLR and TRS inputs are used for balanced line level signals.
3
Input Gain Control
Controls the amount gain applied to the input signal from the
XLR or TRS connector of specific channel. Microphone signals
8
7
). When the switch is not enabled, the
System Manual
4
2
1
3
Advertisement
Table of Contents
