Power Management Setup - ECS 945GCD-M Manual

34
USB Functions (Enabled)
Use this item to enable or disable the USB function.
Legacy USB Support (Enabled)
Use this item to enable or disable support for legacy USB devices. Setting to Auto
allows the system to detect the presence of USB device at startup. If detected, the
USB controller legacy mode is enabled. If no USB device is detected, the legacy USB
support is disabled.
Press <Esc> to return to the main menu setting page.

Power Management Setup

This page sets up some parameters for system power management operation.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
ACPI Suspend Type
PWRON After PWR-Fail
Power On by Ring
Resume By PCI/ PCI-E/Lan PME
Resume By USB (S3)
Resume By PS2 KB (S3)
Resume on RTC Alarm
ACPI Suspend Type (S3(STR))
Use this item to define how your system suspends. In the default, S3, the suspend
mode is a suspend to RAM, i.e, the system shuts down with the exception of a refresh
current to the system memory.
PWRON After PWR-Fail (Power Off)
This item enables your computer to automatically restart or return to its operating
status.
Power On by Ring (Disabled)
The system can be turned off with a software command. If you enable this item,
thesystem can automatically resume if there is an incoming call on the Modem.
Youmust use an ATX power supply in order to use this feature.
Resume By PCI/PCI-E/Lan PME (Disabled)
These items specify whether the system will be awakened from power saving
modeswhen activity or input signal of the specified hardware peripheral or compo-
nent isdetected.
Power Management Setup
S3 (STR)
Power Off
Disabled
Disabled
Disabled
Disabled
Disabled
: Move Enter : Select
+/-/: Value F10: Save ESC: Exit
F1: General Help
F9: Optimized Defaults
Using BIOS
Help Item
Select the ACPI
state used for
System Suspend.