ECS A785GM-M Manual page 94

90
33
37
38
39
3A
3B
3C
40
50
52
60
75
78
7A
7C
84
85
87
8C
8D
8E
90
A0
A1
A2
A4
A7
A8
A9
AA
AB
AC
B1
00
61-70
module for initialization. Initialize language and font modules for ADM.
Activate ADM module.
Initializes the silent boot module. Set the window for displaying text
information.
Displaying sign-on message, CPU information, setup key message, and any
OEM specific information.
Initializes different devices through DIM. See DIM Code Checkpoints
section of document for more information.
Initializes DMAC-1 & DMAC-2.
Initialize RTC date/time.
Test for total memory installed in the system. Also, Check for DEL or ESC
keys to limit memory test. Display total memory in the system.
Mid POST initialization of chipset registers.
Detect different devices (Parallel ports, serial ports, and coprocessor in
CPU, ... etc.) successfully installed in the system and update the BDA,
EBDA...etc.
Programming the memory hole or any kind of implementation that needs
an adjustment in system RAM size if needed.
Updates CMOS memory size from memory found in memory test. Allocates
memory for Extended BIOS Data Area from base memory.
Initializes NUM-LOCK status and programs the KBD typematic rate.
Initialize Int-13 and prepare for IPL detection.
Initializes IPL devices controlled by BIOS and option ROMs.
Initializes remaining option ROMs.
Generate and write contents of ESCD in NVRam.
Log errors encountered during POST.
Display errors to the user and gets the user response for error.
Execute BIOS setup if needed / requested.
Late POST initialization of chipset registers.
Build ACPI tables (if ACPI is supported)
Program the peripheral parameters. Enable/Disable NMI as selected
Late POST initialization of system management interrupt.
Check boot password if installed.
Clean-up work needed before booting to OS.
Takes care of runtime image preparation for different BIOS modules. Fill
the free area in F000h segment with 0FFh. Initializes the Microsoft IRQ
Routing Table. Prepares the runtime language module. Disables the
system configuration display if needed.
Initialize runtime language module.
Displays the system configuration screen if enabled. Initialize the CPU's
before boot, which includes the programming of the MTRR's.
Prepare CPU for OS boot including final MTRR values.
Wait for user input at config display if needed.
Uninstall POST INT1Ch vector and INT09h vector. Deinitializes the ADM
module.
Prepare BBS for Int 19 boot.
End of POST initialization of chipset registers.
Save system context for ACPI.
Passes control to OS Loader (typically INT19h).
OEM POST Error. This range is reserved for chipset vendors & system
manufacturers. The error associated with this value may be different from
one platform to the next.